ASTERION FTS-X series are sealed, maintenance — free front terminal lead-acid batteries. They are manufactured using AGM technology with an absorbed electrolyte. The case design is optimized for installation in 19" and 23" telecommunication cabinets and racks
Ask a Question
Specifications
Nominal voltage, V | 12 |
Nominal capacity, Ah | 100 |
Design life, years | 12 |
Technology | AGM |
Length, mm | 508 |
Width, mm | 110 |
Height,mm | 231 |
Height without terminals, mm | 231 |
Application | Solar and wind power systems / Power supply of telecommunications equipment for mobile and fixed-line operators, Internet service providers, and backbone networks / Uninterruptible power supplies / operation in UPS and power supply installations |
Weight, kg | 32,5 (±3%) |
Description
The main advantage of the FTS-X series is the increased specific capacity. The FTS-X series’ specific capacity is 15% higher than the average one, which allows to install more batteries in a fixed area. FTS-X batteries are optimal for use in both short and long discharge modes. This series demonstrates a high uniformity of quality indicators, which contributes to the extended duration of operation.
Battery construction
Element | Positive plate | Negative plate | Case | Lid | Valve | Terminal | Separator | Electrolyte |
---|---|---|---|---|---|---|---|
Material | Lead dioxide | Lead | ABS | Rubber | Copper | Fiberglass | Acid |
Performance & characteristics:
- AGM technology allows to recombinate 99% of the generated gas;
- No restrictions on air transportation;
- Compliance with the UL requirements;
- Lead plates, alloyed by calcium, provide high energy density;
- Maintenance-free. Do not require distillate topping;
- Long service life;
- The battery case is made of flame-retardant ABS plastic.
Application:
- Uninterruptable power supply
- Communication and telecommunication systems
- Solar and wind power systems
- Autonomous power supply systems
- Other energy storage systems
Operating temperature range
Discharge | -20÷60 |
---|---|
Charge | -10÷60 |
Storage | -20÷60 |
Cycle mode (2,35÷2,4 V/cell): | |
Maximum discharge current | 900 А |
Temperature correction factor | 30 mV/°С |
Standby mode (2,27÷2,3 V/cell): | |
Temperature correction factor | 20 mV/°С |
Discharge Constant Current, A ( 20°С)
V/cell | 30 min | 45 min | 1 h | 2 h | 3 h | 4 h | 5 h | 8 h | 10 h |
---|---|---|---|---|---|---|---|---|---|
1.60V | 110 | 78,8 | 63,5 | 37,1 | 27,8 | 22,3 | 18,5 | 12,4 | 10,1 |
1.65V | 106 | 76,4 | 61,5 | 36,0 | 27,1 | 21,8 | 18,1 | 12,3 | 10,1 |
1.70V | 102 | 73,9 | 59,5 | 35,0 | 26,4 | 21,3 | 17,8 | 12,2 | 10,0 |
1.75V | 97,0 | 71,6 | 57,5 | 34,0 | 25,7 | 20,6 | 17,2 | 12,1 |
10,0 |
1.80V | 93,0 | 68,0 | 55,1 | 32,5 | 24,6 | 19,9 | 16,8 |
12,0 |
10,0 |
Discharge Constant Power, W/cell ( 20°С)
V/cell | 30 min | 45 min | 1 h | 2 h | 3 h | 4 h | 5 h | 8 h | 10 h |
---|---|---|---|---|---|---|---|---|---|
1.60V | 206 | 150 | 121 | 71,6 | 54,4 | 43,8 | 36,5 | 24,6 | 20,1 |
1.65V | 199 | 144 | 117 | 70,1 |
53,2 |
43,3 |
36,1 | 24,4 | 20,0 |
1.70V | 195 | 140 | 115 | 68,3 | 52,1 | 42,7 | 35,8 | 24,2 | 19,8 |
1.75V | 182 | 134 | 110 | 66,4 | 51,1 |
42,1 |
35,5 |
24,1 | 19,7 |
1.80V | 170 | 128 | 103 | 63,8 | 49,7 | 41,0 | 34,6 | 23,8 | 19,6 |